Read Me First

- Before performing the wireless setup
Regarding the preparations and the procedures for using the printer in a wireless connection, refer to [ The necessary environment and the procedures for using the printer in a wireless connection ].

Wireless Setup Using WPS (Wi-Fi Protected Setup)

1.

(1) Press the Setup button (A).
(2) Use the or button (B) to select Wireless LAN setup.
(3) Press the OK button.

2.

Use the or button (C) to select Yes, then press the OK button.
When wireless connection is enabled, the Wi-Fi lamp (D) lights blue.

3.

Select Other setup, then press the OK button.

4.

Select WPS, then press the OK button.

5.

Select Push button method, then press the OK button.

6.

Press the OK button.

- To use the PIN code method for setup
Select PIN code method in 5, then press the OK button. Follow the on-screen instructions to operate the machine and access point. When the screen in 8 appears, press the OK button.

7.

Press and hold the WPS button on the access point (for about 5 seconds), then press the OK button on the machine within 2 minutes.
For details on the WPS button pressing, refer to the manual of your access point.

The Wi-Fi lamp (blue) on the machine flashes while searching for or connecting to an access point.

8.

When the above screen appears, press the OK button.

Install the Software (Network Connection)

• To use the machine by connecting it to a computer, software including the drivers needs to be copied (installed) to the computer’s hard disk. The installation process takes about 20 minutes. (The installation time varies depending on the computer environment or the number of application software to be installed.)

1.

Turn on the computer, then insert the Setup CD-ROM into the CD-ROM drive.
The setup program starts automatically.

2. Windows 7/Windows Vista
Windows XP -> 3

Click Run Msetup4.exe on the AutoPlay screen, then click Yes or Continue on the User Account Control dialog box.
If the User Account Control dialog box reappears in following steps, click Yes or Continue.

3.

Select your place of residence, then click Next.

4.

Select a country or region, then click Next.

5.

Click Easy Install.
The drivers, application software, and on-screen manuals are installed.

6.

Click Install.

7.

Select Use the printer with wireless LAN connection, then click Next.
Follow any on-screen instructions to proceed with the software installation.

8.

When the Printer Detection screen appears, click Next.

9.

When the Detected Printers List dialog box appears, select Canon xxx series, then click Next.

10.

When the Setup Completion dialog box appears, click Complete.

Install the Software (Information)

1.

Click Next.
Follow any on-screen instructions to proceed with the software installation.

- Important Information for the Installation

• If the serial number is not displayed on the registration screen, input the number found inside the machine.

• If the Extended Survey Program screen appears

If you can agree to Extended Survey Program, click Agree.
If you click Do not agree, the Extended Survey Program will not be installed. (This has no effect on the machine’s functionality.)

2.

Click Exit to complete the installation.

3.

Solution Menu EX starts.
Remove the Setup CD-ROM and keep it in a safe place.

The end of the procedure of the wireless LAN setup.

• PIXMA MX420