FAQ ID: 8200822400
Release date: 08 June 2010
- Notes on Wireless Connection
- Access Point Name/Network Name:
* Also referred to as SSID.
An identifier to identify the specific access point.
- Network Key:
* Also referred to as encryption key, WEP key or WPA/WPA2 passphrase, Pre-Shared key.
A password required to set to prevent unauthorized access to communication.
1.
Use the or
button (A) to display Setup, then press the right FUNCTION button (B).
2.
Use the or
button (C) to select Wireless LAN setup, then press the OK button.
3.
Select Yes, then press the OK button.
When wireless connection is enabled, the Wi-Fi lamp (D) lights blue.
4.
Select Easy setup, then press the OK button.
5.
Select the access point name you wrote down, then press the OK button.
6.
Make sure that one of the above screens is displayed, then press the right FUNCTION button.
If the above screen is not displayed, go to 9.
7.
Enter the network key you wrote down on, then press the left FUNCTION button (E).
Press the center FUNCTION button (F) to switch character entry modes.
Enter upper and lower case letters of the alphabet correctly.
8.
Make sure that the network key is correct, then press the OK button.
9.
When the above screen appears, press the OK button.
1.
Turn on the computer, then insert the Setup CD-ROM into the CD-ROM drive.
If you are using Windows, the setup program starts automatically.
2.
Double-click the Setup icon of the CD-ROM folder to proceed to the following screen. Enter your administrator name and password, then click OK.
If the CD-ROM folder does not open automatically, double-click the CD-ROM icon on the desktop.
If you do not know your administrator name or password, click the help button, then follow the on-screen instructions.
3.
Select your place of residence, then click Next.
4.
Select a country or region, then click Next.
5.
Click Easy Install.
The drivers, application software, and on-screen manuals are installed.
6.
Click Install.
7.
Select Use the printer on network, then click Next.
Follow any on-screen instructions to proceed with the software installation.
8.
When the Printer Detection screen appears, click Next.
9.
On the Canon IJ Network Tool screen, select MG5200 series in Printers, then click Next.
1.
When the Register Printer and Scanner screen appears, click Register Printer.
Mac OS X
v.10.6.x v.10.5.x -> Go to 2-A
v.10.4.11 -> Go to 2-B
2-A Mac OS X v.10.6.x/v.10.5.x
Mac OS X v.10.4.11 -> 2-B
(1)
Select Canon MG5200 series canonijnetwork and click Add.
-> Go to 3
2-B Mac OS X v.10.4.11
(1)
When the Printer List window appears, click Add.
(2)
Click More Printers in the Printer Browser window.
(3)
Select Canon IJ Network in the pop-up menu, select Canon MG5200 series in the list of printers, then click Add.
(4)
Make sure that Canon MG5200 series is added to the list of printers.
3.
When the Register Printer and Scanner screen appears, click Register Scanner.
4.
Select Canon MG5200 series on the Scan-from-PC Settings screen, then click OK.
5.
Click Next on the Register Printer and Scanner screen.
- Important Information for the Installation
2.
Click Exit to complete the installation.
It is necessary to restart the computer before scanning using the Operation Panel on the machine for the first time.
3.
Solution Menu EX starts when clicking OK in the Canon Solution Menu EX dialog.
Remove the Setup CD-ROM and keep it in a safe place.
To use from additional computers
1. Insert the Setup CD-ROM into the computer from which you want to use the machine.
2. Follow the on-screen instructions to install the software.
Other settings are not required.
A: Computer from which the machine can be used currently
B: Additional computers on the same network It enables the computer to use the machine.