How to perform the wireless LAN setup so that other computers can share the same printer (Windows)

FAQ ID: 8200822700

Release date: 08 June 2010

Back to FAQ List

Solution

Use from Additional Computers


IMPORTANT
  • If the machine is already connected to a wireless connection, it can be used from additional computers on the same network.

To use from additional computers

1. Insert the Setup CD-ROM into the computer from which you want to use the machine.

2. Follow the on-screen instructions to install the software.
Other settings are not required.

A: Computer from which the machine can be used currently
B: Additional computers on the same network It enables the computer to use the machine.


NOTE
  • For details on the software installation procedure, refer to [ Install the Software　(Network Connection) ]

Install the Software (Network Connection)

  • To use the machine by connecting it to a computer, software including the drivers needs to be copied (installed) to the computer's hard disk. The installation process takes about 20 minutes. (The installation time varies depending on the computer environment or the number of application software to be installed.)


IMPORTANT
  • Quit all applications before installation.
  • Log on as the administrator (or a member of the Administrators group).
  • If the firewall function of your security software displays a warning message, set the security software to always allow access.


NOTE
  • Easy-WebPrint EX

Easy-WebPrint EX is Web print software that is installed on the computer when installing the supplied software.
Internet Explorer 7 or later is required to use this software. An Internet connection is required for installation.

1.

Turn on the computer, then insert the Setup CD-ROM into the CD-ROM drive.
If you are using Windows, the setup program starts automatically.


NOTE
  • If the program does not start automatically, double-click the CD-ROM icon in Computer or My Computer, then double-click MSETUP4.EXE.

2. Windows 7/Windows Vista
Windows XP -> 3

Click Run Msetup4.exe on the AutoPlay screen, then click Yes or Continue on the User Account Control dialog box.
If the User Account Control dialog box reappears in following steps, click Yes or Continue.

3.

Select your place of residence, then click Next.


NOTE
  • If the Select Language screen appears, select a language, then click Next.

4.

Select a country or region, then click Next.

5.

Click Easy Install.
The drivers, application software, and on-screen manuals are installed.


NOTE
  • If you want to select particular items to install, click Custom Install.

6.

Click Install.

7.

Select Use the printer on network, then click Next.
Follow any on-screen instructions to proceed with the software installation.

8.

When the Printer Detection screen appears, click Next.


NOTE
  • If the Printer Connection screen appears instead of the screen above, the connection method is not correctly selected in 7.

- Click Cancel and start again from 6, then be sure to select Use the printer on network in 7.

9.

When the Detected Printers List dialog box appears, select Canon MG5200 series, then click Next.


NOTE
  • If the machine is not detected, Check Printer Settings dialog box is displayed. Refer to the printed manual: Network Setup Troubleshooting. Make sure there is no problem, then click Next again on the screen in 8.

10.

When the Setup Completion dialog box appears, click Complete.

Install the Software (Information)

1.

Click Next.
Follow any on-screen instructions to proceed with the software installation.

- Important Information for the Installation

  • Necessary Information for the User Registration


When the serial number is not displayed on the registration screen automatically, input the serial number located inside the machine (as shown in the illustration).

IMPORTANT
  • If the power is on, the Print Head Holder will move when the Scanning Unit (Cover) (A) is opened.


NOTE
  • The User Registration screen will only be displayed when Europe, Middle East, Africa is selected on the Select Your Place of Residence screen.

  • If the Extended Survey Program screen appears


If you can agree to Extended Survey Program, click Agree.
If you click Do not agree, the Extended Survey Program will not be installed.
(This has no effect on the machine’s functionality.)

2.

Click Exit to complete the installation.

3.

Solution Menu EX starts.


NOTE
  • The buttons displayed on Solution Menu EX may vary depending on the country or region of purchase.

  • Using the Machine from Additional Computers

Now that the wireless connection of the machine is complete, it can be used from additional computers on the same network.
Install software including the drivers on the computer from which you want to use the machine. Other settings are not required.
To add computers from which to use the machine, go to [ Use from Additional Computers ]

  • Installing the XPS Printer Driver

Installing the XPS Printer Driver
In Windows 7 and Windows Vista SP1 or later, the XPS Printer Driver can be installed additionally. To install, perform from in [ Install the Software (Network Connection) ]. Click Custom Install in 5, then select XPS Printer Driver in the Custom Install screen.

Applicable Models

  • PIXMA MG5240
  • PIXMA MG5250

Did this article answer your question?