FAQ ID: 8204068200
Release date: 31 July 2018
2. Once the installation is complete, the settings window for [ Image Transfer Utility 2 ] will be displayed, click [ Next ] .
3. [ Preparation ] will be displayed, read the details carefully and click [ Next ] .
4. [ Pairing Setup ] will be displayed. Keep the screen as it is displayed, and move on to the next step.
2. When the [ Nickname ] screen appears, press the button.
3. Confirm the Nickname (Name of the camera). After confirmation, press the button.
4. Press the / buttons to choose [ OK ] , press the button.
5. Press the button.
Return to the function settings menu.
6. Press the / buttons to choose [ ] , press the button.
7. Press the / buttons to choose [ 1 ] .
8. Press the / buttons to choose [ Wireless communication settings ] , press the button.
9. Press the / buttons to choose [ Wi-Fi settings ] , press the button.
10. Press the / buttons to choose [ Auto send images to computer ] , press the button.
11. Press the / buttons to choose [ Auto send ] , press the button.
12. Press the / buttons to choose [ Enable ] , press the button.
13. Press the / buttons to choose [ OK ] , press the button.
14. Right-click the Start button on the bottom left of the screen ( ), and then select [Network Connections].
15. When this screen is displayed, double-click [Wi-Fi].
16. Select the SSID that matches with the one shown in [SSID:], and then press the button. (See the SSID example below).
17. Click [Wireless Properties].
18. Click the [Security] tab.
19. Tick the [Show characters] checkbox.
20. On the [ Password ] screen, press the button.
21. Enter the password displayed in the [Network security key]. (See the password example below).
22. After the password has been entered, press the / buttons to choose [ OK ] , press the button.
23. Click [Cancel].
24. Click [Close].
25. Close [Network Connections].
26. Press the / buttons to choose Key index, press the button. (This screen may or may not be displayed)
27. Press the / buttons to choose [ Auto setting ] , press the button.
28. The computer name will appear. Confirm that the name displayed on the [ Pairing Setup ] screen is the same, press the button.
29. If the camera Nickname is displayed under [ Procedure for this screen ] , select camera and click on [ Pairing ].
30. Once pairing is complete, the [ Setup Complete ] window will appear, click [ OK ] .
31. The [ Waiting ] window will appear for Image Transfer Utility 2. To continue transfering images from the camera, stay on this screen and wait.
2. Choose [ Image sending options ] .
3. In [Image sending options], specify the transfer conditions.
4. Make sure the camera is off.
2. The images will automatically transfer to the computer once the camera has been turned on within range of the access point.
3. To confirm the transferred images, click [ Open Destination Folder ] .
• Entering characters Press the / / / buttons or turn the dial to choose the key of your desired character, and then press the button. | |
•Moving the cursor Choose [ ] or [ ] and press the button. | |
•Switching input modes Choose [ ] , press the button to switch to capital letters. Choose [ ] , press the button to switch to numbers and characters. | |
•Deleting characters Choose [ ] and press the button. The previous character will be deleted. | |
•Confirming input After pressing the button, press the / buttons to choose [OK] , press the button. |