Home Printers

Canon SELPHY SQUARE QX10

Specifications

Operational Environment
5 - 40 °C, 20 - 80% humidity
Dimensions
Approx. 102.2 x 143.3 x 31.0 mm (excluding protrusions)
Weight
Approx. 445g (excluding ink cartridge and label)

Specifications

  • Dye Sublimation Printing

    For vibrant, smooth and rich images

  • XS-20L Square Photo Paper

    Print square images and stickers that have a writable border

  • 100 Year Print

    Prints will remain high quality up to100 years

  • Wi-Fi

    Connect easily between smartphone and printer

  • USB Charging

    Conveniently charge with USB cable

  • SELPHY Photo Layout app

    Add stamps, filters, borders, text and more

Specifications in detail

Printing System

  • Method
    Dye-sublimation thermal transfer printing system
  • Maximum resolution
    287 x 287 dpi
  • Colours
    3 colour inks (yellow, cyan, magenta) with protective over coating
    256 levels per colour (24 bit colour depth)

Media & Cartridge

  • Sticker paper
    72 x 85 mm, 68 x 68 mm printable area
  • Ink Cartridge
    Included with media
  • Image Longevity
    100 Years Print 1

Print Speeds

  • Sticker paper
    approx. 43 sec 2

Printing

  • Print Modes & Settings
    Controlled by SELPHY Photo Layout app

Print Method

  • Direct From a Smart Device
    Compatible iOS and Android devices via Direct Wi-Fi, using app SELPHY Photo Layout

Power Source

  • AC Power Supply
    Not supported
  • Battery Pack
    Built-in, 20 sheet maximum print capacity per full charge
  • Power Consumption
    3W or less (standby), 62W or less (printing)

Accessories

  • Media
    Color Ink / Label Set XS-20L
  • Other
    USB Micro B connector to USB Type-A connector for charging (included)

All data is based on Canon's standard testing methods.

Subject to change without notice.

  1. To test the image permanence of prints that are stored in an album, we use an accelerated testing method similar to how the image permanence of silver-halide photo papers are measured when stored in dark places. Print samples are printed with the optical density of 1.0 (each Bk, C, M,Y). The samples are kept in a certain environment of high temperature and 50% humidity. The rate of the decrease in the optical density and rate of yellow discoloration are recorded. The recorded results are then converted to the length of time when print image is kept in an environment of 23℃/ 50％ humidity. 'The point where monochromatic/ reflective optical density shows loss of 30% (starting density of 1.0).
  2. Print speed can vary dependent on data size, print method, and print finish setting. Print speed is measured from start of printing excluding paper handling